| Product No. | ALSA0420034 |
| Description | Countersunk Head Phillips Self-Tapping Screw with Sharp Point |
| Size | #8 x 7/16" KA |
| Material | 1018 Carbon Steel |
| Finish | Eco-Friendly Blue Zinc Plated |
| Application | Door and Window Hardware |
Phillips Self Tapping Screws are designed for fastening applications where a Phillips drive, countersunk head, and sharp point are required. This product features a #8 x 7/16" specification and is manufactured from 1018 carbon steel with a blue zinc plated finish. It is specified for door and window hardware applications.
The combination of a countersunk head, Phillips drive, and sharp point provides a defined screw configuration for hardware assembly. With its specified size, material, and surface finish, this Phillips Self Tapping Screw can be selected according to the requirements of door and window hardware manufacturers, suppliers, and buyers.
| Product No. | ALSA0420034 |
| Description | Countersunk Head Phillips Self-Tapping Screw with Sharp Point |
| Size | #8 x 7/16" KA |
| Material | 1018 Carbon Steel |
| Finish | Eco-Friendly Blue Zinc Plated |
| Application | Door and Window Hardware |
These Phillips Self Tapping Screws feature a countersunk head designed for applications where the screw head needs to sit flush or closer to the surface of the assembled component, depending on the corresponding countersunk hole or surface design.
The countersunk head is combined with a Phillips drive, allowing the screw to be installed with a compatible Phillips driver or screwdriver. This configuration makes the product suitable for specific hardware assembly requirements where both the head profile and drive type need to be clearly defined.
For buyers sourcing countersunk self tapping screws, it is important to confirm the head design, screw dimensions, drive type, and application before selecting a product.
The product uses a Phillips drive, which is a cross-shaped recess designed for use with a compatible Phillips screwdriver or driver bit. The drive type is an important specification when selecting screws because it needs to match the installation tools used during assembly.
Phillips Self Tapping Screws are available in different head styles and sizes. This particular product combines a Phillips drive with a countersunk head and sharp point in a #8 x 7/16" configuration.
The screw features a sharp point that forms part of its self tapping design. The pointed end initiates contact with the material during installation, while the screw threads engage with the material as the screw advances.
The suitability of a sharp point self tapping screw depends on the material, thickness, screw specification, and installation requirements. Buyers should select the appropriate screw configuration based on the actual fastening application rather than using the same screw for every material.
This product is specified as #8 x 7/16". The size provides buyers with a defined screw diameter and length specification for product selection and purchasing.
For door and window hardware manufacturers, providing the exact screw size helps ensure that the selected fastener corresponds with the dimensions required by the hardware assembly.
When sourcing #8 x 7/16" Phillips Self Tapping Screws, buyers should also confirm the head type, drive type, point design, material, and surface finish to ensure the complete product specification matches the application.
These Phillips Self Tapping Screws are manufactured from 1018 carbon steel. The material specification provides buyers with clear information when comparing fastening products for manufacturing and hardware applications.
For bulk screw sourcing, specifying 1018 carbon steel together with the screw size, head configuration, drive type, and surface finish helps manufacturers and purchasing teams define the required product more precisely.
The screws feature a blue zinc plated finish. The surface treatment is part of the product specification and provides the screw with its characteristic blue zinc appearance.
When purchasing Phillips Self Tapping Screws, the surface finish can be specified together with the material, size, head type, and application. For this product, the specified finish is blue zinc plating.
These Phillips Self Tapping Screws for Door and Window Hardware are specified for hardware applications involving doors and windows. The product combines a countersunk head, Phillips drive, sharp point, #8 x 7/16" size, 1018 carbon steel material, and blue zinc plated finish.
Door and window hardware manufacturers and distributors may need screws with specific dimensions and head configurations to match their components. A countersunk head can be selected where the hardware design requires a corresponding countersunk hole or surface profile.
When sourcing screws for door and window hardware, buyers should confirm the complete specification, including screw size, head type, drive type, point type, material, and surface finish.
Product Name: Phillips Self Tapping Screws
Countersunk Head: Designed for applications requiring a countersunk head configuration
Phillips Drive: Compatible with Phillips screwdrivers and driver bits
Sharp Point: Designed for self tapping fastening applications
Size: #8 x 7/16"
Material: 1018 carbon steel
Finish: Blue zinc plated
Application: Door and window hardware
Selecting the right Phillips Self Tapping Screws requires consideration of the complete product specification. Screw size is one of the first factors to confirm, followed by head type, drive type, point configuration, material, surface finish, and application.
For this product, the complete specification is #8 x 7/16", 1018 carbon steel, blue zinc plated, countersunk head, Phillips drive, and sharp point. These details provide a clear reference for buyers looking for screws for door and window hardware.
The installation environment and material should also be considered when selecting a self tapping screw. The correct screw should always correspond to the requirements of the specific hardware assembly.
When purchasing Phillips Self Tapping Screws for production or hardware assembly, buyers may work with a Phillips Self Tapping Screws Manufacturer or supplier to specify the required size, material, head type, drive type, point configuration, and surface finish.
This product, identified by product number ALSA0420034, is specified as a #8 x 7/16" Phillips Self Tapping Screw made from 1018 carbon steel with a blue zinc plated finish. Its intended application is door and window hardware.
For bulk sourcing requirements, buyers can provide the required screw specification and quantity so the product can be matched to their hardware application.
There is no single best brand for every application. The right self-tapping screw depends on the required size, head type, drive type, material, surface finish, and intended application. For door and window hardware, buyers should compare the complete screw specification rather than choosing a product based only on brand name.
Whether a pre-drilled or pilot hole is required depends on the screw design, material, thickness, and application. Some self-tapping screws can form their mating thread during installation, while a pilot hole may be appropriate for certain materials or fastening requirements. The installation method should be selected according to the specific screw and application.
A Phillips screw is generally a screw with a Phillips drive recess, which has a cross-shaped profile designed to engage with a compatible Phillips screwdriver or driver bit. A Phillips screw can have different head types, including countersunk, pan, and other configurations.
Self-tapping screws are used to fasten suitable materials by forming or cutting their mating thread during installation. Their applications can include hardware assembly, metal components, equipment parts, and other manufactured products. This particular Phillips Self Tapping Screw is specified for door and window hardware applications.
Phillips Self Tapping Screws provide a defined fastening configuration combining a countersunk head, Phillips drive, and sharp point. Product ALSA0420034 is specified as a #8 x 7/16" screw made from 1018 carbon steel with a blue zinc plated finish for door and window hardware applications.
For buyers and hardware manufacturers, understanding the complete product specification is important when selecting self tapping screws. Size, head type, drive type, point configuration, material, finish, and application should all be considered to identify the appropriate fastening component for the intended assembly.
| Product No. | ALSA0420034 |
| Description | Countersunk Head Phillips Self-Tapping Screw with Sharp Point |
| Size | #8 x 7/16" KA |
| Material | 1018 Carbon Steel |
| Finish | Eco-Friendly Blue Zinc Plated |
| Application | Door and Window Hardware |
We are a specialized manufacturer of non-standard/ standard cold heading screws, bolts, studs, rivets, CNC lathe parts, and other metal fasteners.
Copyright © 2026 DongGuan AOYI Hardware Co., Ltd All rights reserved.
Privacy Policy Cookie Policy Terms and Conditions